*******************************************************************
CTT Dongle - How to Update your Sensorgnome Software (Raspberry Pi)
*******************************************************************
.. image:: images/finished_sg.jpg
:alt: A finished Sensorgnome, ready to be deployed.
Introduction
============
`Cellular Tracking Technologies `_ (CTT) has developed tags which operate on a different frequency (434 MHz) from Lotek's tags (~166.380 MHz). CTT has their own radio dongles which are effective and cheaper than FUNcube dongles (FCD), but they require a software patch for them to work on a Sensorgnome. These instructions are how to install this patch.
Supplies
======================
* Assembled Raspberry Pi with SD card, button, and power adapter.
* CTT Motus Adapter.
Steps for updating file to Sensorgnome
---------------------------------------
#. Download the CTT update from `here `__.
#. Rename the file to "sensorgnome_update.tar.bz2".
#. Connect to the Sensorgnome using :ref:`Wi-Fi ` or :ref:`Ethernet cable `.
#. Install the FileZilla Client, available from the `project's website `__.
#. Open FileZilla and connect to the file system using the following credentials:
* **Host**: sftp://192.168.7.2
* **Username**: root
* **Password**: root
#. Navigate to ``/boot/uboot/`` and upload the update file there.
#. Reboot the Sensorgnome and connect to it again.
#. If the CTT dongle still doesn't show up on the web interface, try rebooting again.